Grass Valley Storm 3G Elite on broadcast editointipaketti monipuolisimmalla liitäntäykisköllä. Liitäntäyksikkö sisältää kaikki tarvittavat liitännät. SDI 3G tuki. Sisältää Edius 6 täysversion. Interfacen saa kytkettyä työasemaan pci-express -kortilla tai kannettavaan tietokoneeseen express card -sovittimella

The Most Comprehensive, Most Complete Signal Interface Available Today
STORM 3G Elite consists of a breakout box with a PCIe 4X I/F card for desktop connection (4X mode: up to 1080p50/60) as well as an Express 34 card (1X mode: up to 1080i) for laptop connection. It ships with a full version of EDIUS 6.

STORM 3G Elite provides the most comprehensive, most complete signal interface available today. Video interfaces include dual 3G SDI, which can be used as either one 3G SDI signal or one pair of dual link 3G (1.5G x 2) SDI signals. Other interfaces include 1080p-capable HDMI I/O, composite (SD only), and component (up to 1080i) analog video I/O.

For audio, STORM 3G Elite has four pairs of AES/EBU interfaces (as eight BNC connectors, each accommodating eight audio I/Os up to 96 kHz, 24-bit). Another four pairs of XLR balanced audio are also available, with a stereo pair each of balanced AND unbalanced audio monitor out. A switchable line/mic (switchable phantom power) is also available for a dedicated voice-over input.

The uniqueness of STORM 3G Elite continues with control/sync. STORM 3G Elite has two RS-422 interfaces, one for controlling a VTR as master, another for control of a slave. Linear timecode I/O, reference in/through/out interfaces (which accept both bi-sync and tri-sync level), and a locking power connector round out the rest of the interfaces.

Specifications
Bus Interface
PCI Express Rev. 1.1 x4 lane
ExpressCard/34

Video Formats (Input/Output) (HDMI)

1920x1080p23.98/25/29.97/50/59.94
1920x1080i50/59.94
1280x720p59.94
720x480i59.94
720x576i50
720x480p59.94
720x576p50

Video Formats (Input/Output) (HD/SD-SDI)

1920x1080i50/59.94
1920x1080psF23.98/24/25/29.97/50/59.94
1280x720p24/50/59.94
720x486i59.94
720x576i50

Video Output Connector
HD/SD-SDI:

Video: SMPTE-292M, SMPTE-259M-C
Audio: SMPTE-299M, SMPTE-272M-A
Analog Component (BNC: Y/Pb/Pr)
Analog Composite (BNC)
Timecode: LTC/VITC Packet (HD), D-VITC (SD)
HDMI 1 port (HDCP not supported):

Video: YCbCr4:2:2 or RGB4:4:4 (8/10-bit)
Audio: LPCM 8-channel (24-bit/48 kHz)

Video Input Connector
HD/SD-SDI:

Video: SMPTE-292M, SMPTE-259M-C
Audio: SMPTE-299M, SMPTE-272M-A
Analog Component (BNC: Y/Pb/Pr)
Analog Composite (BNC)
Timecode: VITC Packet (HD), D-VITC (SD)
HDMI 1 port (HDCP not supported):

Video: YCbCr4:2:2 or RGB4:4:4 (8/10-bit)
Audio: LPCM 8-channel (24-bit/48 kHz)

Audio Formats
LPCM 48 kHz/24-bit

Audio Output Connectors

HDMI LPCM 8-channel
HD/SD-SDI embedded audio 8-channel
AES/EBU digital audio 8-channel
Balanced analog audio 4-channel
Balanced analog audio monitor 2-channel
Unbalanced analog audio monitor 2-channel

Audio Input Connectors
HDMI LPCM 8-channel
HD/SD-SDI embedded audio 8-channel
AES/EBU digital audio 8-channel
Balanced analog audio 4-channel

Reference Input
BNC: Black Burst or Tri-Level Sync

Machine Control
9-pin D-Sub: RS-422A x 2 (Master/Slave)

Power Requirements
+12V: 1.6A, +3.3V: 0.5A

Physical Dimensions
2 RU

Regulatory Compliance
CE, FCC CLASS B, C-Tick

Minimum System Requirements

Any Intel Core 2 or Core iX CPU. Intel or AMD single core CPU with a 3 GHz processor speed or faster (multiple CPUs and/or multi-core CPUs are recommended). SSE2 and SSE3 instruction set supported
1 GB RAM (2 GB or more recommended)
One free PCI Express x1 bus slot
800 MB or more space required for software installation
Drive with ATA100/7,200 rpm or faster capable of sustaining at least 20 MB/s data transfer:
Available hard disk space should be twice the size of the file to be edited
A RAID stripe set of two or more hard disk drives is required for multiple HD stream output
A graphics card with at least 256 MB of graphics memory (512 MB recommended) with support for Direct3D 9.0c or later, and PixelShader Model 3.0 or later is required (PixelShader Model 4.0 or later recommended)
Sound card with WDM driver support required
DVD-ROM drive is required for software installation. For writing onto DVD or Blu-ray disc, a compatible drive is required
Free USB port (1.1 or higher) is required for security key
Windows XP (SP3 or later, 32-bit)
Windows Vista (SP1 or later, 32-bit or 64-bit)
Windows 7 (32-bit or 64-bit)

Esite
- Lisätietoja Grass Valley tuotteista:  http://www.grassvalley.com/desktop